How to Disable IPv6 on Windows

Published:4 October 2021 - 3 min. read

Michael Franklin Image

Michael Franklin

Read more tutorials by Michael Franklin!

Azure Cloud Labs: these FREE, on‑demand Azure Cloud Labs will get you into a real‑world environment and account, walking you through step‑by‑step how to best protect, secure, and recover Azure data.

When introduced, IPv6 was set to eliminate the world’s insatiable appetite for more IPs. But IPv6 adoption has been slow, and some choose to disable IPv6 on Windows for troubleshooting purposes. Let’s learn how.

In this tutorial, you’ll learn how to disable IPv6 through various methods, both via GUI and command-line terminal.

Ready to take the leap? Let’s go!


This tutorial comprises hands-on demonstrations. If you’d like to follow along, be sure you have the following:

  • This tutorial uses Windows 10 build 20H2, but any build of Windows 10 will work.
  • Log into Windows as a user with administrative access.
  • The PowerShell example uses the Windows 10 built-in Windows PowerShell environment.

Disabling IPv6 via the GUI

First, you need to disable IPv6 via the Windows 10 Network Connections app. To do so, you must access your network adapter’s properties to disable IPv6.

1. Right click on the network / Wi-Fi icon at the system tray and choose Open Network & Internet Settings to access your network settings.

Accessing Network & Internet Settings.
Accessing Network & Internet Settings.

2. Under Advanced Network Settings, select Change Adapter Options to see all the adapters (network cards) used on your computer.

Viewing all network cards by selecting Change Adapter Options.
Viewing all network cards by selecting Change Adapter Options.

3. Now, right-click your Ethernet adapter and select Properties. Doing so opens the “Properties” window for the network card you selected.

Accessing the Network Card's Properties.
Accessing the Network Card’s Properties.

4. Find the Internet Protocol v6 (TCP/IPv6) option from the list under the Networking tab. If the option is checked, click on the check box to disable it, as shown below, then click on OK.

After disabling IPv6, you’ll notice no change in your computer’s internet connectivity since IPv4 adapter settings are configured by default.

Disabling IPv6 from your Ethernet card.
Disabling IPv6 from your Ethernet card.

Disabling IPv6 via PowerShell

Perhaps you prefer a command-line environment instead of a GUI when managing Windows network configuration. If so, run the following commands in PowerShell to disable IPv6 network adapters.

1. Open PowerShell as administrator, and run the Get-NetAdapterBinding command below to view the list of bindings for network adapters, their component ID, and status. Additionally, filter all adapters where the ComponentID equals the ms_tcpip6 with the Where-Object command.

Get-NetAdapterBinding | Where-Object ComponentID -EQ 'ms_tcpip6'

In the returned values, note the DisplayName and ComponentID of the adapter that you want to disable; you’ll need them in the next step. In the example below, the Ethernet adapter is chosen.

Listing All Network Adapters with IPv6 Components.
Listing All Network Adapters with IPv6 Components.

2. Run the Disable-NetAdapterBinding command below to disable your network adapter.

Below, the Ethernet adapter with the ms_tcpip6 component is disabled, but replace the name and component ID with your intended target. If successful, no output is shown.

Disable-NetAdapterBinding -Name 'Ethernet' -ComponentID 'ms_tcpip6'
Disabling IPv6 on an adapter.
Disabling IPv6 on an adapter.

3. Finally, run the Get-NetAdapterBinding command below to verify if IPv6 for your network adapter is now disabled.

You can see below, the Ethernet adapter is shown, but replace it with your intended target.

Get-NetAdapterBinding -Name 'Ethernet' -ComponentID 'ms_tcpip6'
Verifying if IPv6 Network Adapter is now Disabled.
Verifying if IPv6 Network Adapter is now Disabled.

Perhaps you have no plans to keep IPv6 enable on any of your network adapters. If so, run this command instead Disable-NetAdapterBinding -Name "*" -ComponentID ms_tcpip6 to go nuclear and disable IPv6 on all network adapters.

Disabling IPv6 for all Network Adapters via Command Prompt

As an alternative to PowerShell, you can turn to the command prompt instead. The command prompt also lets you disable the IPv6 of your network adapters by running a different set of commands than PowerShell.

1. Open the command prompt as administrator, and run the ipconfig command. The ipconfig command displays all current TCP/IP network configuration values, so you can verify if IPv6 is enabled on your network adapter.


Below, you can see that IPv6 is enabled for the ethernet adapter.

Verifying if IPv6 is Enabled.
Verifying if IPv6 is Enabled.

2. Run the series of commands below to disable all IPv6 connectivity for every network interface.

The preceding :: before text indicate comments, just in case you copy-paste the commands into the terminal below.

:: Disables the Teredo tunneling. Teredo is a transition technology that gives 
:: full IPv6 connectivity and host-to-host automatic tunneling 
:: for unicast IPv6 traffic.
netsh interface teredo set state disabled

:: Disables the 6to4 tunnels that support communication with IPv6 internet
netsh interface ipv6 6to4 set state state=disabled undoonstop=disabled

:: Disables all IPv6 transition technologies
netsh interface ipv6 isatap set state state=disabled

If successful, you’ll get an Ok message after running each command, as shown below.

Disabling all IPv6 interfaces.
Disabling all IPv6 interfaces.

3. Finally, rerun the ipconfig command to see verify if you’ve successfully disabled IPv6.


Notice below that IPv6 is not listed, which indicates IPv6 is now disabled.

Verifying if IPv6 is now disabled.
Verifying if IPv6 is now disabled.


Throughout this tutorial, you’ve learned what IPv6 is and how to disable it in Windows. You’ve also learned commands that disable IPv6 both on command prompt and PowerShell.

Now would you include disabling IPv6 on your network troubleshooting routine?

Hate ads? Want to support the writer? Get many of our tutorials packaged as an ATA Guidebook.

Explore ATA Guidebooks

Looks like you're offline!